(Bio)isosteres of ortho- and meta-substituted benzenes

• H. Erik Diepers and
• Johannes C. L. Walker

Beilstein J. Org. Chem. 2024, 20, 859–890, doi:10.3762/bjoc.20.78

• tetrasubstituted BCHs was recently reported by Shi and co-workers [82]. They employed Hantzsch esters as catalysts in the [2π + 2σ] cycloaddition of alkenes and bicyclobutanes. The synthesis of bicyclohexyl ketones by formal (3 + 2) cycloaddition of bicyclobutane and ketenes was recently reported by Studer and co

Catalytic multi-step domino and one-pot reactions

• Svetlana B. Tsogoeva

Beilstein J. Org. Chem. 2024, 20, 254–256, doi:10.3762/bjoc.20.25

• . Zhang, Ma, and W. Zhang reflects the state of the art in the α-amino acid-based [3 + 2] cycloaddition reactions of N–H-type azomethine ylides in multicomponent, one-pot, and stepwise reactions for the synthesis of diverse bioactive heterocyclic compounds and natural products [9]. Computational studies

Perspectives on push–pull chromophores derived from click-type [2 + 2] cycloaddition–retroelectrocyclization reactions of electron-rich alkynes and electron-deficient alkenes

• Michio Yamada

Beilstein J. Org. Chem. 2024, 20, 125–154, doi:10.3762/bjoc.20.13

• reactions, yielding multicyanated ethenes [95]. Contrarily, alkenes bearing three or four ester substitutions partake in a [4 + 2]-type hetero-Diels–Alder (DA) reaction, yielding a third product, presumably through a [3 + 2] cycloaddition reaction, followed by rearrangement. The [2 + 2] CA–RE reactions

• equivalents of TCNEO relative to the alkyne substrate for the generation of the TCBD products [100]. For the reaction, the formal [3 + 2] cycloaddition reaction is postulated to initiate through the initial nucleophilic attack of the alkyne carbon on the electrophilic TCNEO carbon, yielding a zwitterionic

Aldiminium and 1,2,3-triazolium dithiocarboxylate zwitterions derived from cyclic (alkyl)(amino) and mesoionic carbenes

• Nedra Touj,
• François Mazars,
• Guillermo Zaragoza and
• Lionel Delaude

Beilstein J. Org. Chem. 2023, 19, 1947–1956, doi:10.3762/bjoc.19.145

• system (G) was first investigated by Albrecht et al. in 2008 [23]. Because the heterocyclic precursors needed to prepare 1,2,3-triazol-5-ylidenes are readily available through the [3 + 2] cycloaddition of an azide and an alkyne, these compounds are currently the most popular MICs for catalytic and other

• -disubstituted-1,2,3-triazole derivatives is readily achieved via the copper(I)-catalyzed [3 + 2] cycloaddition of an azide and a terminal alkyne (CuAAC) [63][64][65]. A further alkylation of the N3 position with an alkyl halide is an equally straightforward procedure that ultimately affords a large assortment

Trifluoromethylated hydrazones and acylhydrazones as potent nitrogen-containing fluorinated building blocks

• Zhang Dongxu

Beilstein J. Org. Chem. 2023, 19, 1741–1754, doi:10.3762/bjoc.19.127

• presence of Brønsted acid. In their pioneering research, Tanaka et al. reported the [3 + 2] cycloaddition reactions of trifluoroacetaldehyde hydrazones and glyoxals to give 4-hydroxy-3-trifluoromethylpyrazoles. The resultant pyrazoles containing a free 4-hydroxy group were easily converted to a variety of

• group has attracted a significant level of attention, and many trifluoromethylated pyrazoles have been used in medicinal products or in pesticides [66]. The [3 + 2] cycloaddition reactions are considered among the most powerful tools for the synthesis of versatile fluoroalkylated pyrazoles. Enol ethers

• trifluoromethylated 1,2,4-triazoles were synthesized with excellent regioselectivities in [3 + 2] cycloaddition reactions of trifluoromethylated hydrazonoyl chlorides with imidates, amidine and 1H-benzo[d]imidazole-2-thiols, all of which were individually reported by Wang, Deng and Cai, respectively [77][78][79

Decarboxylative 1,3-dipolar cycloaddition of amino acids for the synthesis of heterocyclic compounds

• Xiaofeng Zhang,
• Xiaoming Ma and
• Wei Zhang

Beilstein J. Org. Chem. 2023, 19, 1677–1693, doi:10.3762/bjoc.19.123

• with arylaldehydes are much less explored. The [3 + 2] adducts of α-amino acids could be used for a second [3 + 2] cycloaddition as well as for other post-condensation modifications. This article highlights our recent work on the development of α-amino acid-based [3 + 2] cycloaddition reactions of N–H

• -type AMYs in multicomponent, one-pot, and stepwise reactions for the synthesis of diverse heterocycles related to some bioactive compounds and natural products. Keywords: [3 + 2] cycloaddition; decarboxylation; 1,3-dipolar; double cycloaddition; one-pot synthesis; multicomponent reaction; semi

• anionic charge on the α-carbon connecting to the EWG. They are popular AMYs for 1,3-diploar [3 + 2] cycloaddition reactions with alkenes to generate pyrrolidines 1a–d with high regio- and stereoselectivities. They have been reported in a huge number (1,000+) of publications [18][19][20][21][22][23][24][25

Morpholine-mediated defluorinative cycloaddition of gem-difluoroalkenes and organic azides

• Tzu-Yu Huang,
• Mario Djugovski,
• Sweta Adhikari,
• Destinee L. Manning and
• Sudeshna Roy

Beilstein J. Org. Chem. 2023, 19, 1545–1554, doi:10.3762/bjoc.19.111

• plausible pathways. Attractive elements include the regioselective and straightforward direct synthesis of fully substituted 1,2,3-triazoles, which are otherwise difficult to access, from readily available starting materials. Keywords: [3 + 2] cycloaddition; defluorination; fully decorated 1,2,3-triazoles

• defluorinative processes in gem-difluoroalkenes. NiCl2(PCy3)2 and NiCl2(dppp)2 were chosen for our initial investigations since they have been used in both the defluorination of gem-difluoroalkenes and the coordination with the azides to promote [3 + 2] cycloaddition reactions [2][31][32]. Based on our

• product 3a was obtained. This shows the synthetic utility of this method; however, additional investigations into process chemistry may be necessary to accommodate a larger reaction scale. Conclusion In conclusion, we have shown for the first time a [3 + 2] cycloaddition of gem-difluoroalkenes with

Application of N-heterocyclic carbene–Cu(I) complexes as catalysts in organic synthesis: a review

• Nosheen Beig,
• Varsha Goyal and
• Raj K. Bansal

Beilstein J. Org. Chem. 2023, 19, 1408–1442, doi:10.3762/bjoc.19.102

• diversity, low cost, and versatile applications. This article overviews applications of NHC–Cu(I) complexes as catalysts in organic synthesis over the last 12 years, which include hydrosilylation reactions, conjugate addition, [3 + 2] cycloaddition, A3 reaction, boration and hydroboration, N–H and C(sp2)–H

• addition; [3 + 2] cycloaddition reaction; hydrosilylation reaction; N-heterocyclic carbenes; NHC–Cu complexes; NHC–Cu complexes as catalyst; Introduction N-Heterocyclic carbenes (NHCs) are a neutral species having the carbene carbon atom as a part of the nitrogen heterocyclic ring. The transient

• yield by reacting [Cu(CH3CN)4]BF4 with 2 equiv of benzimidazolium salt 38 in the presence of NaOt-Bu (Scheme 14) [28]. The catalytic activity of the complex 39 was studied in the [3 + 2] cycloaddition of azides with alkynes [28]. Coyle et al. reported the synthesis of a series of NHC and ADC (acyclic

One-pot nucleophilic substitution–double click reactions of biazides leading to functionalized bis(1,2,3-triazole) derivatives

• Hans-Ulrich Reissig and
• Fei Yu

Beilstein J. Org. Chem. 2023, 19, 1399–1407, doi:10.3762/bjoc.19.101

• azide was combined with a subsequent copper-catalyzed (3 + 2) cycloaddition with terminal alkynes. This one-pot process was developed with a simple model alkyne, but then applied to more complex alkynes bearing enantiopure 1,2-oxazinyl substituents. Hence, the precursor compounds 1,2-, 1,3- or 1,4-bis

• discovery of the copper-catalyzed alkyne azide (3 + 2) cycloaddition (CuAAC) [3][4], has dramatically changed the approaches to many problems in chemistry, supramolecular chemistry, materials science, biological chemistry and related fields (selected reviews: [5][6][7][8][9][10][11][12][13][14][15

• situ are possible [23]. Later, examples were published showing that these methods are also compatible with the conditions of CuAAC. The earliest case was probably published by Fokin et al. [24][25], one of the inventors of the original copper-catalyzed (3 + 2) cycloaddition. Many examples of

Nucleophile-induced ring contraction in pyrrolo[2,1-c][1,4]benzothiazines: access to pyrrolo[2,1-b][1,3]benzothiazoles

• Ekaterina A. Lystsova,
• Maksim V. Dmitriev,
• Andrey N. Maslivets and
• Ekaterina E. Khramtsova

Beilstein J. Org. Chem. 2023, 19, 646–657, doi:10.3762/bjoc.19.46

• -benzothiazol-2-yl(diazo)acetates (Scheme 1, entry 3) [12], dearomative [3 + 2] cycloaddition reactions of benzothiazoles with cyclopropanes (Scheme 1, entry 4) [13][14][15], multicomponent reactions (MCRs) of benzothiazoles, isocyanides and 2-methylidenemalonates (Scheme 1, entry 5) [16], 1,3-dipolar

Computational studies of Brønsted acid-catalyzed transannular cycloadditions of cycloalkenone hydrazones

• Manuel Pedrón,
• Jana Sendra,
• Irene Ginés,
• Tomás Tejero,
• Jose L. Vicario and
• Pedro Merino

Beilstein J. Org. Chem. 2023, 19, 477–486, doi:10.3762/bjoc.19.37

• and co-workers demonstrated for transannular Diels–Alder cycloaddition reactions of symmetrically tethered large systems (10–18-membered rings) [29]. In this context, we have recently reported the transannular enantioselective (3 + 2) cycloaddition of cycloalkenone hydrazones under Brønsted acid

1,4-Dithianes: attractive C2-building blocks for the synthesis of complex molecular architectures

• Bram Ryckaert,
• Ellen Demeyere,
• Frederick Degroote,
• Hilde Janssens and
• Johan M. Winne

Beilstein J. Org. Chem. 2023, 19, 115–132, doi:10.3762/bjoc.19.12

• reverse (3 + 2) cycloaddition which expels a heteroatomic anion via a β-elimination-type mechanism somewhat similar to a classical Grob-type fragmentation. Similarly, 1,3-dithiolanes undergo fragmentation at relatively low reaction temperatures, limiting their synthetic application to alkylation with

• dependence [95]. On the other hand, simple benzyl cations can undergo more controlled (3 + 2) annulations, as is illustrated by the long-known Friedel–Crafts-type acid-catalyzed cascade reaction of styrene leading to the cyclic styrene dimer 86 (Scheme 13c) [96][97]. This (3 + 2) cycloaddition reactivity of

• suppress homodimerization, via a stepwise (3 + 2) cycloaddition of the initially generated cumyl cation across the olefin in amylene. Our group became intrigued by the potential of dihydrodithiins to act as carbocation-stabilizing groups, as these would represent a synthetic equivalent of ‘naked’ allyl

A novel bis-triazole scaffold accessed via two tandem [3 + 2] cycloaddition events including an uncatalyzed, room temperature azide–alkyne click reaction

• Ksenia Malkova,
• Andrey Bubyrev,
• Vasilisa Krivovicheva,
• Dmitry Dar’in,
• Alexander Bunev and
• Mikhail Krasavin

Beilstein J. Org. Chem. 2022, 18, 1636–1641, doi:10.3762/bjoc.18.175

• molecular scaffold. Pondering various opportunities for post-condensational modifications of the 1,5-disubstituted 1,2,3-triazole core according to this strategy, we turned our attention to such powerful transformation as the azide–alkyne [3 + 2] cycloaddition (also known as the azide–alkyne click reaction

One-pot double annulations to confer diastereoselective spirooxindolepyrrolothiazoles

• Juan Lu,
• Bin Yao,
• Desheng Zhan,
• Zhuo Sun,
• Yun Ji and
• Xiaofeng Zhang

Beilstein J. Org. Chem. 2022, 18, 1607–1616, doi:10.3762/bjoc.18.171

• 10.3762/bjoc.18.171 Abstract A novel four-component reaction in one pot as an atom- and step-economic process was developed to synthesize diastereoselectively spirooxindolepyrrolothiazoles through sequential N,S-acetalation of aldehydes with cysteine and decarboxylative [3 + 2] cycloaddition with olefinic

• (Table 1, entries 2–4) superior to 86% yield for 3 h (Table 1 entry 1), and followed by decarboxylative [3 + 2] cycloaddition with the second equivalent of compound 1a and olefinic oxindole 4a under reflux heating for 12 h. It indicates that the one-pot reaction process with EtOH and iPrOH afforded the

• purification from N,S-acetalation with 1.0:1.15 of 1a/2 at 25 °C for 6 h with EtOH as solvent, in situ followed by addition of 1.1:1.0 of 1a/4a for [3 + 2] cycloaddition at 90 °C for 9 h gave compound 5a with the 81% of LC yield. Next, the stepwise process was also carried out by using the thioproline 3a (1

Functionalization of imidazole N-oxide: a recent discovery in organic transformations

• Koustav Singha,
• Imran Habib and
• Mossaraf Hossain

Beilstein J. Org. Chem. 2022, 18, 1575–1588, doi:10.3762/bjoc.18.168

• cyanoacetate to generate ethyl 2-cyano-2-(1,3-dihydro-2H-imidazole-2-ylidene)acetates in the presence of aldehyde catalyst through a [3 + 2] cycloaddition [16]. Here, imidazole N-oxides behaved as 1,3-dipoles and nucleophiles in Michael-type addition reactions. The optimized reaction conditions were estimated

• . Based on some experimental results, a suitable mechanistic pathway has been proposed (Scheme 1). At first, imidazole N-oxide underwent a [3 + 2] cycloaddition reaction with ylidene 5 to form unstable cycloadduct 6, which then rearomatized followed by ring opening to provide the intermediate 7. Finally

• of ethyl 2-cyano-2-(1,3-dihydro-2H-imidazole-2-ylidene)acetate derivatives via [3 + 2] cycloaddition reactions. C–H/C–Li coupling reaction of 2H-imidazole 1-oxides with pentafluorophenyllithium. Transition-metal-free coupling reaction of 2H-imidazole 1-oxides with polyphenols. Reaction conditions: 1

A facile approach to spiro[dihydrofuran-2,3'-oxindoles] via formal [4 + 1] annulation reaction of fused 1H-pyrrole-2,3-diones with diazooxindoles

• Pavel A. Topanov,
• Anna A. Maslivets,
• Maksim V. Dmitriev,
• Irina V. Mashevskaya,
• Yurii V. Shklyaev and
• Andrey N. Maslivets

Beilstein J. Org. Chem. 2022, 18, 1532–1538, doi:10.3762/bjoc.18.162

• investigated for FPDs: the [4 + 2] cycloaddition with alkenes resulting in pyran-annulated products [27][28][29][30][31][32][33][34] and the [3 + 2] cycloaddition with nitrones resulting in isoxazole-annulated products [35][36][37] (Scheme 2). However, formal [4 + 1] cycloaddition reactions for FPDs remain to

• crystal X-ray analysis (CCDC 2201614). As evinced by the NMR data, only one diastereomer of product 3aa was obtained. Contrary to the isoxazole-annulated products of a [3 + 2] cycloaddition of nitrones to FPDs [35], product 3aa appears to be stable on storage in solution, which was confirmed by the fact

Synthesis of 3,4,5-trisubstituted isoxazoles in water via a [3 + 2]-cycloaddition of nitrile oxides and 1,3-diketones, β-ketoesters, or β-ketoamides

• Md Imran Hossain,
• Md Imdadul H. Khan,
• Seong Jong Kim and
• Hoang V. Le

Beilstein J. Org. Chem. 2022, 18, 446–458, doi:10.3762/bjoc.18.47

• Agriculture, Agricultural Research Service, University of Mississippi, Mississippi 38677, USA 10.3762/bjoc.18.47 Abstract Herein we report a method for the synthesis of 3,4,5-trisubstituted isoxazoles in water under mild basic conditions at room temperature via a [3 + 2]-cycloaddition of nitrile oxides and

• 1,3-diketones, β-ketoesters, or β-ketoamides. We optimized the reaction conditions to control the selectivity of the production of isoxazoles and circumvent other competing reactions, such as O-imidoylation or hetero [3 + 2]-cycloaddition. The reaction happens fast in water and completes within 1–2

• prevalent scaffold in biomedical research and drug discovery programs. We also proposed a plausible mechanism for the selectivity of the [3 + 2]-cycloaddition reaction to produce 3,4,5-trisubstituted isoxazoles. Not to be overlooked are our optimized reaction conditions for the dimerization of hydroximoyl

Bifunctional thiourea-catalyzed asymmetric [3 + 2] annulation reactions of 2-isothiocyanato-1-indanones with barbiturate-based olefins

• Jiang-Song Zhai and
• Da-Ming Du

Beilstein J. Org. Chem. 2022, 18, 25–36, doi:10.3762/bjoc.18.3

• construction of bispirobarbiturates [30][31]. In 2019, for example, An and co-workers reported an asymmetric Michael/Mannich [3 + 2] cycloaddition reaction between N-(2,2,2-trifluoroethyl)isatin ketimines and barbiturate-based olefins (Scheme 1a) [32]. Based on the current knowledge, the construction of

The PIFA-initiated oxidative cyclization of 2-(3-butenyl)quinazolin-4(3H)-ones – an efficient approach to 1-(hydroxymethyl)-2,3-dihydropyrrolo[1,2-a]quinazolin-5(1H)-ones

• Alla I. Vaskevych,
• Nataliia O. Savinchuk,
• Ruslan I. Vaskevych,
• Eduard B. Rusanov,
• Oleksandr O. Grygorenko and
• Mykhailo V. Vovk

Beilstein J. Org. Chem. 2021, 17, 2787–2794, doi:10.3762/bjoc.17.189

• well as by Sm(OTf)3-catalyzed stereoselective [3 + 2] cycloaddition of bis-silyldienediolate and imines, in turn synthesized from anthranylamides and benzaldehydes [32]. A promising approach to the synthesis of 2,3-dihydropyrrolo[1,2-a]quinazolin-5(1H)-one derivatives substituted at the pyrrolidine

α-Ketol and α-iminol rearrangements in synthetic organic and biosynthetic reactions

• Scott Benz and
• Andrew S. Murkin

Beilstein J. Org. Chem. 2021, 17, 2570–2584, doi:10.3762/bjoc.17.172

• episilvestrol (35), natural products with potent anticancer properties. The step prior to the rearrangement involved a photoinduced [3 + 2] cycloaddition between hydroxyflavone 36 and methyl cinnamate (37), resulting in the bicyclic α-ketol 38 as a mixture of diastereomers (Ph and CO2Me groups trans) (Figure 9

• the mixture of 38 and 39 induced a second α-ketol rearrangement to 40 as a tautomeric mixture. The same research group later utilized the same [3 + 2] cycloaddition and α-ketol rearrangement approach to prepare the 2′′′-epimer of 35, which bears an inverted methyl acetal in the dioxane ring, but this

Facile and innovative catalytic protocol for intramolecular Friedel–Crafts cyclization of Morita–Baylis–Hillman adducts: Synergistic combination of chiral (salen)chromium(III)/BF₃·OEt₂ catalysis

• Karthikeyan Soundararajan,
• Helen Ratna Monica Jeyarajan,
• Raju Subimol Kamarajapurathu and
• Karthik Krishna Kumar Ayyanoth

Beilstein J. Org. Chem. 2021, 17, 2186–2193, doi:10.3762/bjoc.17.140

• -ium-2-ide (7a) was synthesised at room temperature by treating methyl acrylate, hydrazine hydrate and benzaldehyde in a yield of 67%. On treating the synthesised azomethine imine 7a (1.2 mM) and 2-substituted-1H-indenes 6b and 6c (1 mM) in toluene at 70 °C affords 8a and 8b via [3 + 2] cycloaddition

• purified by column chromatography to afford the corresponding [3 + 2] cycloaddition product 8a in 61% yield. Compound (8a): Yield: 192 mg (61%); yellowish oil; IR (cm−1): 2972, 2254, 1954, 1562, 1671, 1455, 1245; 1H NMR (CDCl3, 400 MHz) δH 7.80–7.06 (m, 9H, Aro-H), 5.90 (s, 1H, HC-N-CO), 4.36–4.21 (m, 2H

Asymmetric organocatalyzed synthesis of coumarin derivatives

• Natália M. Moreira,
• Lorena S. R. Martelli and
• Arlene G. Corrêa

Beilstein J. Org. Chem. 2021, 17, 1952–1980, doi:10.3762/bjoc.17.128

• and colleagues proposed an asymmetric [3 + 2] cycloaddition employing a coumarin dipolarophile 43 with azomethine ylides 60 organocatalyzed by quinidine (62) for the formation of fused pyrrolidine compounds through activation of the coumarin substrate by hydrogen bonding [53]. The methodology enabled

• addition in the least hindered Re face, consequently resulting in products of (R)-configurations, which were determined via X-ray crystallography. A stereoselective [3 + 2] cycloaddition with indandione alkylidenes 103 and 3-homoacylcoumarin 70 as the 1,3-dipole precursor, to generate a series of coumarin

• hydroxylated malonate 53 catalyzed by NHC 55. Oxidative [4 + 2] cycloaddition of enals 57 to coumarins 56 catalyzed by NHC 59. Asymmetric [3 + 2] cycloaddition of coumarins 43 to azomethine ylides 60 organocatalyzed by quinidine 62. Synthesis of α-benzylaminocoumarins 64 through Mannich reaction between 4

Sustainable manganese catalysis for late-stage C–H functionalization of bioactive structural motifs

• Jongwoo Son

Beilstein J. Org. Chem. 2021, 17, 1733–1751, doi:10.3762/bjoc.17.122

• conjugative transformations, such as azide–alkyne [3 + 2]-cycloaddition [30][31][32][33][34][35][36][37]. Based on their previous late-stage fluorination studies [22][25], Groves et al. further showcased a manganese(III)–salen-catalyzed azidation process using an aqueous azide solution as a convenient azide

A recent overview on the synthesis of 1,4,5-trisubstituted 1,2,3-triazoles

• Pezhman Shiri,
• Ali Mohammad Amani and
• Thomas Mayer-Gall

Beilstein J. Org. Chem. 2021, 17, 1600–1628, doi:10.3762/bjoc.17.114

• industry. The current review aims to cover a wide literature survey of numerous synthetic strategies. Recent reports (2017–2021) in the field of 1,4,5-trisubstituted 1,2,3-triazoles are emphasized in this current review. Keywords: azides; Click reaction; [3 + 2]‐cycloaddition; fully functionalized 1,2,3

• a [3 + 2]-cycloaddition between alkynes 73 and 76 and alkylthiotosyl azides 74 using MeOLi in the presence of a copper(I) catalyst in dioxane at room temperature. This Click/intramolecular sulfenylation reaction displayed an extensive scope, complete regioselectivity, and good to high yield of

• for the reaction as both of the two selanyl groups are used [53]. Trisubstituted triazoles 93 containing an Sb substituent at position C5 were prepared via a Cu-catalyzed [3 + 2]-cycloaddition reaction between several ethynylstibanes 91 and benzyl azide 92 using CuBr under air. The reaction proceeded

A straightforward conversion of 1,4-quinones into polycyclic pyrazoles via [3 + 2]-cycloaddition with fluorinated nitrile imines

• Greta Utecht-Jarzyńska,
• Karolina Nagła,
• Grzegorz Mlostoń,
• Heinz Heimgartner,
• Marcin Palusiak and
• Marcin Jasiński

Beilstein J. Org. Chem. 2021, 17, 1509–1517, doi:10.3762/bjoc.17.108

• spirocyclic 1,4,2-dioxazole derivatives [13][14]. Furthermore, for photochemically generated benzonitrile isopropanide, competitive C=O and C=C additions with 1,4-quinones were observed [15]. On the other hand, the slightly less polar benzonitrile benzylide underwent [3 + 2]-cycloaddition to the C=C bond

• -thiadiazoles as the products of [3 + 2]-cycloaddition to the C=S bond [25]. Taking into account that fluorinated heterocycles [31][32][33][34], including pyrazoles [31][35][36], are of great significance for various medicinal and agricultural applications, the development of new methods for the construction of

• fluorine-containing organic molecules combined with the 1,4-quinone moiety can be considered as a challenging problem of current organic synthesis. Thus, the main goal of the present study was to check the course of [3 + 2]-cycloaddition reactions of electron-deficient CF3-substituted nitrile imines 7 with